Invision® TV WALL MOUNT BRACKET – NEW SLIM LINE DESIGN – WITH CANTILEVER ARM TILT & SWIVEL FOR SAMSUNG, SONY, PHILIPS, TOSHIBA, PANASONIC, LG etc. 26, 32, 37, 40, 42, 46, 47, 50, 52, 55 INCH LED LCD PLASMA SCREENS (MAX VESA 400 x 400) Reviews
3 comments
96 of 97 people found the following review helpful
Very solid and sturdy, but keep in mind the weight of the TV, 18 Aug 2011
This review is from: Invision® TV WALL MOUNT BRACKET – NEW SLIM LINE DESIGN – WITH CANTILEVER ARM TILT & SWIVEL FOR SAMSUNG, SONY, PHILIPS, TOSHIBA, PANASONIC, LG etc. 26, 32, 37, 40, 42, 46, 47, 50, 52, 55 INCH LED LCD PLASMA SCREENS (MAX VESA 400 x 400) (Electronics)
I’ve been looking to wall mount my TV for a while now, since it sat too low on the TV stand. There are simply loads and loads of different TV brackets available. I did not want one which was slim line (against the wall) as I am aware that the cables connected to the back of the TV require a certain amount of room. Also I wanted to avoid the situation where the TV wall bracket would be visible from behind the TV and so after having seen the reviews of this wall mount I decided to invest. I have a 37in LED tv which weighs 15Kg, which this bracket can comfortably support. Firstly the delivery process was top notch, the order turned up a few days after being placed.
All the tools, bolts and rawl plugs are included and the instructions are fairly straight forward. There are an array of machine screws (3 sets of different sizes) provided to ensure that the back plate can be attached to the rear of the television. You’ll need to do some simple calculations to determine where to drill the three holes needed to hold the wall bracket (which holds the cantilever arm), this is to ensure that you don’t end up with the television too high and also too far to the left. I calculated the top hole for the wall bracket to be 6 cm below from the top edge of the TV and 22 cms to the right of the centre of the back plate. You’ll need a drill with a size 10 drill bit and a spirit level to ensure you get all the holes right. Once the cantilever arm is in place I’d recommend asking a friend to help lift the TV to attach to position the back plate onto the fastening clamp and then holding it, while it is being screwed in. This bracket is very strong and sturdy and I can happily recommend it, it is totally hidden from sight of my tv. However before purchasing check the weight of the TV to ensure the clamp is suitable to support the weight.
Help other customers find the most helpful reviews
This review is from: Invision® TV WALL MOUNT BRACKET – NEW SLIM LINE DESIGN – WITH CANTILEVER ARM TILT & SWIVEL FOR SAMSUNG, SONY, PHILIPS, TOSHIBA, PANASONIC, LG etc. 26, 32, 37, 40, 42, 46, 47, 50, 52, 55 INCH LED LCD PLASMA SCREENS (MAX VESA 400 x 400) (Electronics)
This bracket is fantastic value for money, I noticed one poor review before I placed my order saying it was unstable? rubbish. The only way this could be unstable is if you didn’t understand how to fix it to the wall, the instructions given are clear and specific. The bracket is well made and does everything specified. I have bought it to support a 40″ Sony Bravia which it does perfectly the movement is smooth you can adjust it in the horizontal plane as well as the well thought out adjustment in the vertical plane. The ability to fix the backplate to the TV prior to hanging it on the bracket makes the whole process easy. Just one observation the distance from the centre to the wall is 47cm not the 50cm stated this may be of interest to anybody who intends to turn the TV at right angles to the wall. I am delighted with my purchase at last a TV bracket at a realistic price.
Help other customers find the most helpful reviews
This review is from: Invision® TV WALL MOUNT BRACKET – NEW SLIM LINE DESIGN – WITH CANTILEVER ARM TILT & SWIVEL FOR SAMSUNG, SONY, PHILIPS, TOSHIBA, PANASONIC, LG etc. 26, 32, 37, 40, 42, 46, 47, 50, 52, 55 INCH LED LCD PLASMA SCREENS (MAX VESA 400 x 400) (Electronics)
Very happy with this bracket, delivery was fast, bracket is robust with good fixings. Good manoeuverability and no concerns that the 43″ Sony TV it is supporting is unsafe when bracket extended. We use it in the kitchen/snug so pull it around when sitting at breakfast bar.
Help other customers find the most helpful reviews
Very solid and sturdy, but keep in mind the weight of the TV,
I’ve been looking to wall mount my TV for a while now, since it sat too low on the TV stand. There are simply loads and loads of different TV brackets available. I did not want one which was slim line (against the wall) as I am aware that the cables connected to the back of the TV require a certain amount of room. Also I wanted to avoid the situation where the TV wall bracket would be visible from behind the TV and so after having seen the reviews of this wall mount I decided to invest. I have a 37in LED tv which weighs 15Kg, which this bracket can comfortably support.
Firstly the delivery process was top notch, the order turned up a few days after being placed.
All the tools, bolts and rawl plugs are included and the instructions are fairly straight forward. There are an array of machine screws (3 sets of different sizes) provided to ensure that the back plate can be attached to the rear of the television.
You’ll need to do some simple calculations to determine where to drill the three holes needed to hold the wall bracket (which holds the cantilever arm), this is to ensure that you don’t end up with the television too high and also too far to the left. I calculated the top hole for the wall bracket to be 6 cm below from the top edge of the TV and 22 cms to the right of the centre of the back plate.
You’ll need a drill with a size 10 drill bit and a spirit level to ensure you get all the holes right.
Once the cantilever arm is in place I’d recommend asking a friend to help lift the TV to attach to position the back plate onto the fastening clamp and then holding it, while it is being screwed in.
This bracket is very strong and sturdy and I can happily recommend it, it is totally hidden from sight of my tv. However before purchasing check the weight of the TV to ensure the clamp is suitable to support the weight.
Was this review helpful to you?
|Anthony Jarvis,
This bracket is fantastic value for money, I noticed one poor review before I placed my order saying it was unstable? rubbish. The only way this could be unstable is if you didn’t understand how to fix it to the wall, the instructions given are clear and specific. The bracket is well made and does everything specified. I have bought it to support a 40″ Sony Bravia which it does perfectly the movement is smooth you can adjust it in the horizontal plane as well as the well thought out adjustment in the vertical plane. The ability to fix the backplate to the TV prior to hanging it on the bracket makes the whole process easy. Just one observation the distance from the centre to the wall is 47cm not the 50cm stated this may be of interest to anybody who intends to turn the TV at right angles to the wall. I am delighted with my purchase at last a TV bracket at a realistic price.
Was this review helpful to you?
|Does what it says….,
Very happy with this bracket, delivery was fast, bracket is robust with good fixings. Good manoeuverability and no concerns that the 43″ Sony TV it is supporting is unsafe when bracket extended. We use it in the kitchen/snug so pull it around when sitting at breakfast bar.
Was this review helpful to you?
|